Industrial PC for Water and Wastewater Treatment
Irontech Group designs and manufactures panel PCs, industrial monitors and SCADA hardware in Spain for drinking water treatment plants, wastewater treatment plants (WWTP), pumping stations, desalination plants and water control centres. Our units feature IP66 and IP69K protection, ATEX Zone 2/22 certification and AISI 316L stainless steel housings, and are built to run 24/7 in humidity, condensation, corrosive gases and high-pressure washdowns.
Panel PCs and industrial PCs for water and wastewater treatment
We are a European manufacturer with more than 20 years of experience in rugged industrial hardware. We work with water utilities, engineering firms and SCADA integrators. Every stage of the water cycle brings a different threat to electronics, so we configure each unit for the exact area where it will be installed.
Drinking water treatment plants
Panel PCs and HMIs for intake, filtration, chemical dosing and disinfection. In chlorine and ozone rooms, AISI 316L stainless steel withstands chemical corrosion.
Wastewater treatment plants (WWTP)
Panel PCs and HMIs for pre-treatment, biological reactors, clarifiers and sludge dewatering. Full IP66 and IP69K protection against constant humidity, aerosols and hydrogen sulphide (H₂S).
ATEX panel PCs, HMIs and monitors for digestion and biogas
Digesters, gas holders and biogas lines require certified equipment. Our ATEX Line is certified for ATEX Zone 2/22, so operators can work safely in the field.
Pumping stations and distribution networks
Panel PCs for pump control, telemetry and remote control of water supply, sewer and irrigation networks. Built to run 24/7 for years in remote, unheated kiosks.
SCADA hardware for treatment plants and control rooms
Industrial monitors and panel PCs for operation rooms and remote control centres. With THINCLind, our industrial thin client, you can manage every workstation from a single point, with access control by zone.
Desalination and coastal plants
AISI 316L stainless steel units for reverse osmosis, high-pressure pump rooms and chemical cleaning (CIP), resistant to salt spray.
Water equipment manufacturers and integrators
OEM and custom solutions from small production runs, with no large minimum orders. Size, touchscreen, connections, mounting, housing and branding can all be customised.
Certifications and credentials
IP66 and IP69K panel PCs
IP69K is the highest ingress protection rating: the unit withstands high-pressure, high-temperature water jets, such as pressure washers. IP66 protects against powerful water jets. Our range includes Alpha (IP66), Hydra (full IP66) and Jet (full IP69K).
ATEX Zone 2/22 certification
Units certified for potentially explosive atmospheres, such as the biogas areas of wastewater treatment plants.
National product manufacturer
Designed and manufactured in Girona (Spain), with full control of the supply chain, direct contact with the manufacturer and long-term spare parts.
ISO 9001 and ISO 14001 certified
Quality control throughout the manufacturing process and certified environmental management.
Certified CO₂ reduction
CO₂ reduction certified by the Spanish Ministry for the Ecological Transition (MITECO), with 100% green energy.
Advanced technology and R&D
Our own R&D team adapts each unit to the plant’s requirements and technical specifications.
More than a supplier: your technology partner for the water cycle
We support your project from technical specification to commissioning and maintenance. As the manufacturer, we can adapt a unit to a specific tender, keep the same reference throughout the project’s lifetime and repair it at our own facilities: diagnosis within 24-48 hours and repair in under 5 working days, with no intermediaries. We share the sector’s commitment to the 2030 Agenda, especially SDG 6: clean water and sanitation.
WHERE WE ADD VALUE
The principles behind our work in the water sector
We are a long-term partner for those who run an essential service.
We ensure
Water can’t stop. Every unit is designed for 24/7 service continuity.
We collaborate
We work hand in hand with engineering firms, SCADA integrators and maintenance teams.
We innovate
Our in-house R&D goes beyond the catalogue.
We deliver
From prototype to serial production, with complete industrial control.
We respond
Diagnosis within 24-48 hours and repair in under 5 working days.
We preserve
Certified CO₂ reduction and 100% renewable energy: we care for the same resource our customers manage.
Related products
ALPHA
IP66 Panel PC
NERO
VESA panel PC with metal chassis
HYDRA
Full IP66 Stainless Steel PC Panel
JET
INOX Full IP69K Panel PC
SECUREX
ATEX Zone 2/22 panel PCs
Protex
ATEX Zone 2/22 panel PCs
Frequently asked questions
What IP rating does a PC need in a wastewater treatment plant?
In control rooms, IP65 front protection is enough. In wet process areas, full IP66 is recommended, and in hose-down areas, full IP69K.
What is IP69K and how does it differ from IP66?
IP69K withstands high-pressure, high-temperature water jets. IP66 protects against powerful water jets, without high pressure or temperature.
Do you offer ATEX panel PCs for biogas areas?
Yes. Securex and Protex, and their monitor versions, are ATEX Zone 2/22 certified.
Are they compatible with my SCADA system?
Yes. They are full industrial PCs, and each unit is configured to order for your software.
What happens if a unit fails?
Diagnosis within 24-48 hours and repair in under 5 working days, directly with the manufacturer.
Where are they manufactured?
In Girona (Spain), under ISO 9001 and ISO 14001 certification.
Let's talk about your project?
Tell us about your current setup, where the equipment will be located, and what software you use. A technician will recommend the appropriate configuration.
